JACOBSEN LF510 LARGE AREA REEL MOWER

Back

Product Details

The newest addition to Jacobsen's legendary line of LF mowers, the LF510 provides superior quality-of-cut, fits the budget and is a simple Tier 4 Final emission regulation solution.

  • • Features Jacobsen's new TrueSet cutting units with Classic XP reels for fast bedknife-to-reel adjustment and industry-leading holding power to deliver a clean and consistent quality-of-cut.
  • • The lightweight mower design distributes less than 10 psi of operating ground pressure on the turf.
  • • Affordability from the start and through its life with 100 in. (2.54 m) of productivity and simplified maintenance including wet park brakes, an onboard control module, and easily accessible routine service items.
  • • Powered by a rugged and reliable Kubota Tier 4 Final engine for simple emission compliance.
  • • Note: The LF510 2WD without ROPS is for use in specific applications on level ground with no potential of roll over. This unit is NOT for use on hills or slopes. Jacobsen recommends the use of a certified ROPS and seat belt in all instances where hills or slopes may be encountered - optional ROPS with seat belt kit required.
Type
Kubota® D1105E 3-cylinder, liquid cooled, low-emissions certified diesel
Rated Horsepower
24.8 hp @ 3000 rpm
Emissions Level
EPA Tier 4 Final (EU Stage IIIA)
Displacement
68.5 cu. in
Air Cleaner
Dry cartridge type with evacuator, valve and service indicator
Cooling System
Pressurized, sealed cooling system
Lubrication
Fully pressurized
Fuel Capacity
17 gal.
Oil Filter Type
Full-flow, replacement spin-on type
Electrical System
12 V starter; 40 amp alternator/regulator
Mowing
8 mph
Transport
10 mph
Reverse
4 mph
Traction System
Variable displacement, hydrostatic pump with 2 high-torqued wheel motors; 4WD models: SureTrac™ parallel-cross-series traction system
Reel Drive
Gear pump with quick disconnect (FlashAttach) coupled reel motors, solenoid controlled mow valve; backlapping standard. Mow Speed Limiter: Foot Activated Lever
Hydraulic System
14 gal. capacity; oil monitor with low-oil alarm standard
Reel Lift
Joystick control, one-touch lift/lower control for all five reels
Hydraulic Cooling
Hydraulic oil cooler; large-volume, full-flow 10 micron filter
Front Tires
26.5 x 14.0-12 tubeless
Rear Tires
20.0 x 10.0-8 tubeless
Brakes
Dynamic, through-traction system
Parking Brake
Automatic wet park brake integrated in front wheel motors; engage switch on control console
Ground Pressure
10 psi
Steering
Rear-wheel, hydrostatic power steering
Number and Size
Five 5 in. diameter x 22 in
Number of Blades
7 heavy section fairway blades
Cutting Frequency
7 blade: 0.074 in./mph
Overall Cutting Width
100 in.
Height-of-Cut Range (Depending on turf condition, reel wear and bedknife installed)
0.375-0.75 in.
Available high-cut kit raises cutting height to 1.187 in.
Diagnotics: Onboard electronic control module with light-emitting diode display and alarms for aid in diagnostics.

Gauges: Fuel gauge, hour meter, and indicator warning lights: diagnostics list, glow plug indicator high engine coolant temperature, engine oil pressure, and battery voltage.
Weight with Reels Up
2WD without ROPS: 2594 lbs.
2WD with ROPS: 2738 lbs.
4WD: 2818 lbs.
All weights are with full fluids
Weight with Reels Down
2WD without ROPS: 1969 lbs.
2WD with ROPS: 2138 lbs.
4WD: 2194 lbs.
All weights are with full fluids, weight at tires for ground pressure
Length (less catchers)
108 in.
Height
88 in. with ROPS; 58.7 in to top of steering wheel
ROPS optional for 2WD, application specific. 4WD: ROPS standard with seat belt.
Width
115 in.
Transport: 87 in.

 

Contact us today for more information

Mid Devon: 01884 254444 South Devon: 01752 690390
Contact your sales representative