JACOBSEN AR522 CONTOUR ROTARY MOWER

Back

Product Details

The AR522 five-gang rotary mower equipped with SureTrac™ four-wheel drive traction, weight transfer control and TrimTek™ decks allows you to glide over contours and climb hills with ease. It is ideal for maintaining intermediate golf roughs, greens and tee surrounds, and sports and recreational fields.

  • • Five, fully floating 22 in (56 cm) TrimTek contour rotary decks are the ideal size to mow hilly terrain with sharp undulations and reduce the chance of scalping.
  • • TrimTek deck design with exclusive downdraft blade keeps clippings suspended longer for exceptional mulching results. Three-tiered discharge opening distributes clippings evenly for a superior after-cut appearance.
  • • SureTrac 4WD parallel-cross-series system automatically transfers power where needed to provide superior traction for hill climbing and side slope operation.
  • • Maintenance free, wet parking brakes deliver safe braking on even the steepest of slopes and reduce total cost of ownership with no linkages or pads to service or adjust.
Type
Kubota® V2403-M-DI 4-cylinder, liquid-cooled diesel
Rated Horsepower
48.9 hp
Emissions Level
EPA Tier 4 Interim
Displacement
148.5 cu. in.
Air Cleaner System
2-stage Donaldson® dry cartridge type with evacuator valve and service indicator
Cooling System
Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt. capacity
Lubrication
Fully pressurized
Fuel Capacity
17 gal.
Oil Filter Type
Full-flow, replaceable spin-on remote type
Electrical System
12V input/output controller; 40-amp alternator; 600 CCA battery
Mowing
7 mph
Transport
12 mph
Reverse
5 mph
Traction System
SureTrac™ 4WD, parallel-cross-series system servo-controlled variable displacement hydro; four high-torque wheel motors; 2WD in reverse
Deck Drive
2-section pump and direct-cooled deck motors
Hydraulic System
14 gal. capacity; hydraulic tank oil level monitor and horn alarm; GreensCare biodegradable fluid; full-flow, 10 micron filter, 40 gpm
Hydraulic Cooling
Side-by-side radiator/hydraulic oil cooler; pressurized
Front Tires
Two 26.5 x 14-12, 6-ply, turf tread
Rear Tires
Two 22.5 x 10-8, 4-ply turf tread
Brakes
Dynamic, through-traction system
Parking Brake
Wet parking brakes integrated in front wheel motors; engage switch on control console
Steering
Rear wheel, hydrostatic power steering with tilt adjustable steering wheel
Number and Size
Five, TrimTek™ 22 in. rotary cutting decks. Equipped for rear-discharge or mulching, with full-length rear roller and scraper
Construction
7-gauge heavy-duty welded with pressed steel
Caster Wheels
Ten, 5.0 x 4.0 in. with greaseable tapered roller bearings
Cutting Unit Lift
Hand operated, joystick controlled hydraulic lift system
Weight Transfer
Adjustable hydraulic weight transfer- automatic electronic activation at operator controls
Blades
Five, 22.4 in. heat treated alloy combo blades
Motor/Spindle
Fixed displacement, self-lubricating with 1 in. diameter shaft; double sealed bearings
Height of cut
0.75 - 5.25 in. in 0.25 in. increments; minimal tools required for adjustment
Cutting Capacity
Up to 6.4 acres per hour at 7 mph (no overlaps or stops)
Overall Cutting Width
90 in.
Fuel Economy & Runtime
1.09 gal/hr fuel consumption at 40% load; Up to 15.6 hours on single tank of fuel (dependent on operator and turf conditions)
Weight
3691 lbs.
Length
130 in.
Height
89 in. with ROPS up; 61 in. with ROPS down or folded; 84.5 in. with Ballcage installed
Wheelbase
63 in.
Width
98 in.

 

Contact us today for more information

Mid Devon: 01884 254444 South Devon: 01752 690390
Contact your sales representative