JACOBSEN HR500 LARGE AREA ROTARY MOWER
Back
Product Details
The Jacobsen HR500 & HR600 have been developed from the ground up as a new generation of adaptable and practical wide area mowers. Delivering productivity on all fronts, the Jacobsen HR500 & HR600 are highly manoeuvrable, engineered for reduced downtime and produce the widest width of cut in their class. The first in a range of wide area mowers, the HR500 and HR600 are designed with high strength steel throughout, reducing overall weight where possible to make best use of their available power. A range of engines, control systems and cutting widths are available to give options for all budgets and working conditions.
| Type | Kubota V2403-M-DI-E3B 4-cyl, liquid-cooled diesel |
| Rated Horsepower | 36.5 kW (48.9 HP) @ 2700 rpm |
| Emission Level | EU Stage IIIA - (EPA Tier 4 Interim) |
| Cooling System | Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt. capacity, 8.5 fins per inch |
| Fuel Capacity | 20.4 gal |
| Electrical System | 12-volt, input/output controller. 45/60 amp alternator. Overload protection with automotive type fuses. |
| Traction System | Hydrostatic closed loop parallel cross series SureTrac system; variable displacement piston pump; front high torque fixed displacement piston wheel motors; full time auto 4wd fwd, on demand in reverse. |
| Deck Drive | Seven individual hydraulic motors with self lubricating integral bearings |
| Hydraulic System | 13.3 gal capacity reservoir, O-ring face seal fittings, 10 micron remote charge filters, suction screen at tank, oil cooler side by side radiator, diagnostic test ports. |
| Front Tires | 26 x 12-12 tubeless 8 ply |
| Rear Tires | 20 x 10-8 tubeless 6 ply |
| Service Brakes | Dynamic through traction system |
| Parking Brake | Wet parking brakes integrated into wheel motors |
| Steering | Q-Amp® Variable rate, hydrostatic powered equal displacement cylinder to rear wheels |
| Number and Size | One 1.52m (60 in.) front deck; Two 0.9m (35 in.) or 1.03m (40 in.) impact absorbing wing decks |
| Caster Wheels | Six, 9 x 3.5 - 4. Smooth, semi pneumatic puncture proof, sealed precision ball bearings |
| Weight Transfer | On demand electrically operated hydraulic weight transfer system |
| Height of cut | 25-120 mm (1 - 4.75 in.) in 6.5mm (0.25 in.) increments; tool-less adjustment |
| Cutting Capacity | At 12 kph (7.5 mph): 3.24 ha/hr (8.0 acres/hr) 3.56 ha/hr (8.8 acres/hr) |
| Overall Cutting Width | 3.0m (118 in.) or 3.28m (129 in.) |
| Deck Lift/Lower | Fingertip operated joysticks for individual deck lift/lower; cross cut position; front deck service position with lock pin. Electronic safety locks. |
| Deck Construction | Bull nose pro le, high strength, low weight steel construction. Solid bumper rails, bolted assembly of all impact and wear parts |
| Mowing | 7.5mph |
| Transport | 15.5 mph |
| Reverse | 4 mph |
| Weight | 1697 kg (3741 lbs); 1912 kg (4215 lbs) with cab |
| Length | 3.62 m (143 in ) Front deck down |
| Height | 2.11 m (83 in.) ROPS Up; 1.70 m (67 in.) ROPS & Decks Down; 2.2 m (57 in.) with cab |
| Transport Width | 1.65 m (65 in.) at 50 mm (2 in.) height of cut |
| Accessories | Road lighting kit, beacon, Tilt Sensor Technology (TST), air suspension seat, puncture resistant tyres, air-conditioned cab |